Energy Storage for Commercial and Industrial Sites in South Carolina
I break down how battery energy storage works for commercial and industrial sites in South Carolina, what drives the design, and what to check on your load first.
Read articleBlog
Field notes on power and electrical work
No-nonsense writing on power quality, industrial controls, and the problems worth a master electrician.
Motor Failures Caused by Power Quality Problems
Motors that keep failing early usually point to a power quality problem, not a bad motor. Here is what I look for and how I diagnose it across South Carolina.
Read articleNuisance Breaker Trips in a Plant: Tracking Down the Real Cause
A breaker that keeps tripping usually points to a real fault, not a bad breaker. Here is how I track down nuisance trips in South Carolina plants.
Read articleIndustrial Control Panels: What Goes Wrong and How I Find It
When an industrial control panel fails, the fault is rarely where the alarm points. Here is how I track down what actually goes wrong inside the enclosure.
Read articleBackup Power and UPS Systems for Critical Commercial Loads
I break down how backup power and UPS systems protect critical commercial loads, what to size, and where they fit alongside a generator in South Carolina facilities.
Read articleGrounding and Bonding Problems in Industrial Facilities
Bad grounding and bonding causes nuisance trips, equipment damage, and noise in industrial plants. Here is how I track down the real problems on site.
Read articleThermal Imaging for Electrical Panels in Industrial Facilities
I use thermal imaging to catch loose connections and overloaded circuits in industrial panels before they fail. Here is what I look for and why it matters.
Read articleHow to Diagnose Recurring Equipment Failures Caused by Power Issues
When equipment keeps failing and nobody can explain why, the cause is often power quality. Here is how I track down the electrical root cause in your facility.
Read articleHarmonics in Commercial Electrical Systems: Causes and Corrections
I break down what causes harmonics in commercial electrical systems, how they damage your equipment, and the corrections I use to bring distortion back under control.
Read articleVoltage Sags and Transients: What They Cost a Manufacturing Plant
I break down what voltage sags and transients actually do to a manufacturing plant, why they hide in your data, and how I track them down before they cost you a shift.
Read articleWhat Power Quality Analysis Actually Measures in an Industrial Facility
I break down what a power quality analysis actually measures in an industrial plant, from harmonics to voltage sags, and how those readings point to the real fault.
Read articleWhat Power Quality Analysis Actually Finds
A plain-language look at power quality analysis: the harmonics, voltage problems, and hidden faults most electricians never test for.
Read article